Note: Press Apply if you want to test your changes directly.

Enable the Joystick checkbox. This allows the following setup. 

If you using a Joypad with digital buttons uncheck the Analog Joystick Checkbox. 

The joystick X-Axis can control the Manual X Fader. And the joystick Y-Axis can control the Manual Y Fader. Let the desired crusher parameter be modulated by the manual faders.

To control volume settings use the Z-Axis of the joystick. Choose the desired mixer fader and the offset and scaling.

Buttons

You can setup the functions of the joystick buttons. Choose the desired action which should be triggered by pressing a button. 

The blue "Leds" will flash if you hit buttons.

Press Apply if you like to test your changes.

Force Feedback

This page allows to setup the force that will be feedback by the crusher. The force of each Axis can be modulated by three crusher modulation parameters. Note: Not the offset parameter but the modulation parameter generates the force. The three forces are added. 

Only the parameters of the first generator is used. There is no change if several generators are used. 

The resulting force is shown by the gauges. 

Tip: Let a crusher parameter modulate by Manual X or Manual Y and use this parameter generating the force. If you careful adjust the forces you can generate strange feelings (e.g. spring or damper effects).

Additional you can at a grain period effect which is generated out of actual length and pause parameter of the first generator. This effect lets you "feel" the grains.

Press Apply to feel your changes directly.

The force feedback functions of crusher-X were tested with Logitechs "Wingman FORCE". Other joysticks, wheels and paddles may not work in the desired way or may make strange results.