Choose the desired sampler channel with the tab-controls. Open a soundfile with the directory button. Then choose Loop mode. If the file is in stereo, you must select the right (1) or left (2) channel because the output of the sampler is mono. Vary the pitch of the file by sliding the fader. Vary the start and and stop position of the loop to select the desired segment in the file. Use the PM-Wheels to adjust the loop. To move the faders exactly use the right mouse button. For small Loops it is recommended that you using .wav files, because the .mp3 decoding does not allow very small loops without dropouts.

Use the Lock Button to fix the looplength. After locking the loop you the start and stop faders are interconnected.

Choose the desired routing by using the send fader. You can route each sampler channel separately.

Press Play to hear the file. If you do not hear any sound, make sure that the volume fader, the sampler fader and output faders in the mixer are not muted. When the faders are muted, the file automatically stops playing to reduce the workload on the DSP system.